How to fix the curve of the leg flipping up

I'm in the process of sewing up the first toiles of the patterns that will available to buy in November this year (2016). I finished #2 pattern The Penelope, a tanga with fold-over elastic, and the curve of the front leg of the elastic, instead of sitting flat, stood up vertically, perpendicular to the brief. 

Has this ever happened to you? And do you know how to fix it? There is nothing worse than having spent all that time and effort sewing up a pair of briefs, for there to be an error and not know the reason why.

On this particular brief, it was all down to the elastic, it was too heavy and it didn't stretch very much. It was the type of elastic that would be best used on the top wing of the bra or maybe even the top of the bra cup.

As you stretch the elastic when stitching around the legs if it's too heavy it takes it's original form, it's not soft enough to sit flat. 

Other reasons that the elastic may flip up:

1. Would be if the curve of the leg is too sharp, so you would need to make the leg curve shallower.

2. The elastic is too wide so the elastic can't sit flat around the curve, so the only way it can sit is if it flips up.

I hope that helps? Also if you are new to elastic and can't gauge if an elastic is heavy or not, hold it up to the light and stretch it, the lighter it is then more light will shine through it. So a dense heavy elastic you won;t be able to see through it.

How to sew a hidden gusset

If you don't own an overlocker, being able to sew a hidden gusset, not only keeps your work neater but it allows you hide all raw edges of the top of the gusset piece. It's not a hard thing to sew, however if you have tried, you've probably ended up with a twisted inner or outer gusset, and had to unpick and re-start again, I know I have in the past.

The way I am going to show you, is the easiest way I have found without twisting seams and attempting to hold all the pieces together and ending up with some pieces stretched. Apologies for the garish nature of the fabrics, I hauled together all the brights so you could see exactly what was going on and did the top stitching in lilac and bottom stitching in black.

Roll up the front piece, and sandwich between inner and outer gusset, ensuring you have the right sides and wrong sides correct. See above.

Turn upside down, and lift the inner gusset back, roll up the back piece and place onto the outer gusset, again ensuring the correct sides are together.

Flip the inner gusset back over and pin together the with the outer gusset and back piece.

Sew together.

Pull out the front and back pieces, and the seams connecting them to the gusset pieces will be hidden. Sew the inner and outer gusset together which will make applying the elastic easier.

The final piece - all seams hidden.




How to spec a bra and brief

It's finally here. The book I've been mentioning for soooooo long, it went through edit after edit to make sure that it was fully understood, so aimed at complete novices and also people with knowledge. 

Providing industry knowledge on what to write on a spec sheet and how to write a spec sheet, this book should demystify specification sheets. With different blank spec sheets that can be used, for those wanting to make different sizes of their lingerie or get them made by a manufacturer then this book will take you there.

*This book is part of three, including How to write a tech pack, and How to grade a bra and brief.

You can buy it here:  e-book.