Van Journal: How to start a lingerie line

After a year of planning Vanjo launched a soft launch in October, which basically meant that not all the pieces were ready were to launch at the date, but a couple of the pieces were , so rather than wait until it was ready, and pushing the launch date back further. Launching with just a couple of pieces meant that I could keep an eye of any problems that may occur and handle them quickly, luckily non did, but it was great to release the pieces even if it wasn’t in the way that I thought it would be.

A year may seem a long while to get everything ready, but if you read “Why Vanjo nearly didn’t get launched” you’ll see all the problems I en-counted along the way.

First up to be released was Ottilie pink Wave bra in which the waves are never far away, a soft pink wave high apex print bra with yellow trims. And the high waisted Ella brief which is a black and white Bretton stripe brief, trimmed with yellow elastic to contrast yet match the pink wave bra.

high apex bra and stripe brief

Now the next set is ready to be launched, is the Harper navy liberty print tana lawn cotton with birds bra, mixed with French lace and dotty mesh. And the matching briefs.

french lace bra and liberty print briefs

There is another set in the wings waiting to be added to the collection, a yellow geometric sized crop top, a high waisted brief and low waisted gap detailed brief. Which hopefully will be added to the lingerie line before Xmas.

32dd yellow geometric crop top

Difference between launch and re-launch

The main difference between the launch this time around and this time around, is that the patterns will be available from the collection so everything is more accessible, also the collections are much smaller, which means that we can constantly be adding to the lines rather than relying on seasons. You can follow how this lingerie label started and where it’s at from following the blogs named ‘Van Journal’ this gives the insight of how I started my lingerie label, and the pitfalls I’ve encountered.

Also I have more of an idea of who my customer is this time, and what I want to achieve with the label, and I’m happy to continue the label this time, alongside writing and freelancing.

Unlike the first time around where there was an underwire in the collection, these bras will just be non wired. I released a soft bra first time round and had such a good response that it seemed to make sense to concentrate on that side of the market. Sometimes it’s hard to find a large size cup bra in a soft cup so hopefully Vanjo will bridge that gap offering fun pieces. This time around the soft bras have more structure, keeping the same style as the high apex bra from first time round, this time, the underband is built up between the cup and around the sides. This targets those with full volume breasts and also those who struggle say after breastfeeding where they feel that their breasts have changed shaped, some saggier, others with less volume. By having a non stretch underband at the front and sides, this allows the breasts to stay put and forward, and encases the breast rather than flatten them which some soft bras do. I wrote about boobs and breastfeeding on an earlier piece.

How to start a lingerie line

So if you’re at the start of wanting to begin your own lingerie line, and don’t know where to start or what order you need to complete everything, one thing I find helpful is to have a time line. A timeline of the lingerie you want to get completed by a certain date, and work back from there, You could plan it in then use the spaces for your actual dates of what is outstanding that you need to complete. By having something solid to work by, lets you plan ahead or highlights any areas in which you need to learn, know more about or to outsource.

Below is an example of a time line that is available in the design sheet pack, which allows you to track your lingerie from start to finish, so one glance and you know exactly where you are with it all. In the design sheets, is an example, how to fill in the sheet and blank examples for you to use. There is a different sheet if you are planning to outsource the manufacturing.

Example of a timeline (available in the design sheet pack)

Example of a timeline (available in the design sheet pack)

I have always worked with timelines, in my own business and definitely always in other companies, when you’re called into meetings to discuss where production is and what you are waiting for, you don’t want to be wading through notes of everything, having everything on a single piece of paper means you can pass over styles, and know exactly what is left to do.

If you’re got your design ideas ready, what now? Think about fabrics, where you might source them, including trims, also are you going to make them yourself, or manufacturer them. If you’re going to a factory then you will need a technical drawing at the least and maybe a tech pack so they can cost how much it will cost you manufacturer. Even if you don’t end up going with the factory you first thought of, making these contacts is invaluable for the future. Then you have think about patterns, samples, and getting your lingerie to a fit stage in which you are happy with. Don’t worry if it takes longer than first thought, along the way you will be solving problems or things you hadn’t thought of and this will put you in good steed for further down the line.

If you need help with producing a technical drawing then please contact me.